<-
Apache > HTTP Server > Documentation > Version 2.4 > Modules

Apache MPM event

Available Languages:  en  |  fr 

Description:A variant of the worker MPM with the goal of consuming threads only for connections with active processing
Status:MPM
Module Identifier:mpm_event_module
Source File:event.c

Summary

The event Multi-Processing Module (MPM) is designed to allow more requests to be served simultaneously by passing off some processing work to the listeners threads, freeing up the worker threads to serve new requests.

To use the event MPM, add --with-mpm=event to the configure script's arguments when building the httpd.

Topics

Directives

Bugfix checklist

See also

top

Relationship with the Worker MPM

event is based on the worker MPM, which implements a hybrid multi-process multi-threaded server. A single control process (the parent) is responsible for launching child processes. Each child process creates a fixed number of server threads as specified in the ThreadsPerChild directive, as well as a listener thread which listens for connections and passes them to a worker thread for processing when they arrive.

Run-time configuration directives are identical to those provided by worker, with the only addition of the AsyncRequestWorkerFactor.

top

How it Works

This MPM tries to fix the 'keep alive problem' in HTTP. After a client completes the first request, it can keep the connection open, sending further requests using the same socket and saving significant overhead in creating TCP connections. However, Apache HTTP Server traditionally keeps an entire child process/thread waiting for data from the client, which brings its own disadvantages. To solve this problem, this MPM uses a dedicated listener thread for each process to handle both the Listening sockets, all sockets that are in a Keep Alive state, sockets where the handler and protocol filters have done their work and the ones where the only remaining thing to do is send the data to the client.

This new architecture, leveraging non-blocking sockets and modern kernel features exposed by APR (like Linux's epoll), no longer requires the mpm-accept Mutex configured to avoid the thundering herd problem.

The total amount of connections that a single process/threads block can handle is regulated by the AsyncRequestWorkerFactor directive.

Async connections

Async connections would need a fixed dedicated worker thread with the previous MPMs but not with event. The status page of mod_status shows new columns under the Async connections section:

Writing
While sending the response to the client, it might happen that the TCP write buffer fills up because the connection is too slow. Usually in this case a write() to the socket returns EWOULDBLOCK or EAGAIN, to become writable again after an idle time. The worker holding the socket might be able to offload the waiting task to the listener thread, that in turn will re-assign it to the first idle worker thread available once an event will be raised for the socket (for example, "the socket is now writable"). Please check the Limitations section for more information.
Keep-alive
Keep Alive handling is the most basic improvement from the worker MPM. Once a worker thread finishes to flush the response to the client, it can offload the socket handling to the listener thread, that in turns will wait for any event from the OS, like "the socket is readable". If any new request comes from the client, then the listener will forward it to the first worker thread available. Conversely, if the KeepAliveTimeout occurs then the socket will be closed by the listener. In this way the worker threads are not responsible for idle sockets and they can be re-used to serve other requests.
Closing
Sometimes the MPM needs to perform a lingering close, namely sending back an early error to the client while it is still transmitting data to httpd. Sending the response and then closing the connection immediately is not the correct thing to do since the client (still trying to send the rest of the request) would get a connection reset and could not read the httpd's response. So in such cases, httpd tries to read the rest of the request to allow the client to consume the response. The lingering close is time bounded but it can take relatively long time, so a worker thread can offload this work to the listener.

These improvements are valid for both HTTP/HTTPS connections.

Limitations

The improved connection handling may not work for certain connection filters that have declared themselves as incompatible with event. In these cases, this MPM will fall back to the behaviour of the worker MPM and reserve one worker thread per connection. All modules shipped with the server are compatible with the event MPM.

A similar restriction is currently present for requests involving an output filter that needs to read and/or modify the whole response body. If the connection to the client blocks while the filter is processing the data, and the amount of data produced by the filter is too big to be buffered in memory, the thread used for the request is not freed while httpd waits until the pending data is sent to the client.
To illustrate this point we can think about the following two situations: serving a static asset (like a CSS file) versus serving content retrieved from FCGI/CGI or a proxied server. The former is predictable, namely the event MPM has full visibility on the end of the content and it can use events: the worker thread serving the response content can flush the first bytes until EWOULDBLOCK or EAGAIN is returned, delegating the rest to the listener. This one in turn waits for an event on the socket, and delegates the work to flush the rest of the content to the first idle worker thread. Meanwhile in the latter example (FCGI/CGI/proxied content) the MPM can't predict the end of the response and a worker thread has to finish its work before returning the control to the listener. The only alternative is to buffer the response in memory, but it wouldn't be the safest option for the sake of the server's stability and memory footprint.

Background material

The event model was made possible by the introduction of new APIs into the supported operating systems:

Before these new APIs where made available, the traditional select and poll APIs had to be used. Those APIs get slow if used to handle many connections or if the set of connections rate of change is high. The new APIs allow to monitor much more connections and they perform way better when the set of connections to monitor changes frequently. So these APIs made it possible to write the event MPM, that scales much better with the typical HTTP pattern of many idle connections.

The MPM assumes that the underlying apr_pollset implementation is reasonably threadsafe. This enables the MPM to avoid excessive high level locking, or having to wake up the listener thread in order to send it a keep-alive socket. This is currently only compatible with KQueue and EPoll.

top

Requirements

This MPM depends on APR's atomic compare-and-swap operations for thread synchronization. If you are compiling for an x86 target and you don't need to support 386s, or you are compiling for a SPARC and you don't need to run on pre-UltraSPARC chips, add --enable-nonportable-atomics=yes to the configure script's arguments. This will cause APR to implement atomic operations using efficient opcodes not available in older CPUs.

This MPM does not perform well on older platforms which lack good threading, but the requirement for EPoll or KQueue makes this moot.

top

AsyncRequestWorkerFactor Directive

Description:Limit concurrent connections per process
Syntax:AsyncRequestWorkerFactor factor
Default:2
Context:server config
Status:MPM
Module:event
Compatibility:Available in version 2.3.13 and later

The event MPM handles some connections in an asynchronous way, where request worker threads are only allocated for short periods of time as needed, and other connections with one request worker thread reserved per connection. This can lead to situations where all workers are tied up and no worker thread is available to handle new work on established async connections.

To mitigate this problem, the event MPM does two things:

This directive can be used to fine-tune the per-process connection limit. A process will only accept new connections if the current number of connections (not counting connections in the "closing" state) is lower than:

ThreadsPerChild + (AsyncRequestWorkerFactor * number of idle workers)

An estimation of the maximum concurrent connections across all the processes given an average value of idle worker threads can be calculated with:

(ThreadsPerChild + (AsyncRequestWorkerFactor * number of idle workers)) * ServerLimit

Example

ThreadsPerChild = 10
ServerLimit = 4
AsyncRequestWorkerFactor = 2
MaxRequestWorkers = 40

idle_workers = 4 (average for all the processes to keep it simple)

max_connections = (ThreadsPerChild + (AsyncRequestWorkerFactor * idle_workers)) * ServerLimit
                = (10 + (2 * 4)) * 4 = 72

When all the worker threads are idle, then absolute maximum numbers of concurrent connections can be calculared in a simpler way:

(AsyncRequestWorkerFactor + 1) * MaxRequestWorkers

Example

ThreadsPerChild = 10
ServerLimit = 4
MaxRequestWorkers = 40
AsyncRequestWorkerFactor = 2

If all the processes have all threads idle then:

idle_workers = 10

We can calculate the absolute maximum numbers of concurrent connections in two ways:

max_connections = (ThreadsPerChild + (AsyncRequestWorkerFactor * idle_workers)) * ServerLimit
                = (10 + (2 * 10)) * 4 = 120

max_connections = (AsyncRequestWorkerFactor + 1) * MaxRequestWorkers
                = (2 + 1) * 40 = 120

Tuning AsyncRequestWorkerFactor requires knowledge about the traffic handled by httpd in each specific use case, so changing the default value requires extensive testing and data gathering from mod_status.

MaxRequestWorkers was called MaxClients prior to version 2.3.13. The above value shows that the old name did not accurately describe its meaning for the event MPM.

AsyncRequestWorkerFactor can take non-integer arguments, e.g "1.5".

Available Languages:  en  |  fr 

top

Comments

Notice:
This is not a Q&A section. Comments placed here should be pointed towards suggestions on improving the documentation or server, and may be removed again by our moderators if they are either implemented or considered invalid/off-topic. Questions on how to manage the Apache HTTP Server should be directed at either our IRC channel, #httpd, on Freenode, or sent to our mailing lists.